Monday, December 23, 2024
HomeCyclingIf At First You Don’t Succeed… – Bike Snob NYC

If At First You Don’t Succeed… – Bike Snob NYC

Facebook
Twitter
Pinterest
WhatsApp


With the Roaduno duly racked and working properly, the sensible factor can be to proceed to experience it as is and get to understand it while plotting my subsequent transfer:

Alas, I’m not sensible, and this morning I made a decision I used to be going to go forward and unlock that inside chainring:

You understand that scene in “Taxi Driver” with the gun salesman? That’s how I really feel once I’m digging out spare elements for a undertaking:

[“Lookit that, that’s a beautiful little derailleur.”]

In response to Rivendell, the inventory freewheel “is nice for single speeds however doesn’t work properly with chain tensioners,” so I figured I’d swap it for this one which makes use of a Shimano backside bracket device to put in:

I additionally had what I figured can be an ideal entrance derailleur:

And between The Basic Cycle twenty first Century Friction Shifter Shootout and a field of treats I’d acquired from Rivendell I had a couple of thousand rear derailleurs to select from, which I finally narrowed down to those:

For a shifter I figured I’d use a Silver2:

And naturally I’d want different odds and ends, equivalent to a brand new chain and a cable information for the underside of the underside bracket shell:

Additionally in my field of treats was a 44-tooth chainring, so I figured whereas I used to be at it I’d as properly not solely unlock the little ring however shoot for the moon and go for a 3×1 with an “overdrive” gear:

After putting in the chainring, I eliminated the little nipple pastie from the shifter boss:

Then I mounted the Silver2 within the downtube shifter place, since I figured that approach once I begin swapping cockpits I wouldn’t need to relocate it:

Putting in the entrance derailleur, I spotted that for the reason that center and enormous chainring have been so shut in measurement it must sit fairly excessive as much as clear that center ring:

So I modified my thoughts and reverted to the unique setup:

For the tensioner I made a decision to make use of the Ultegra, since capability wasn’t going to be a priority and it appeared just like the tidiest possibility:

Excitedly I headed out for a check experience:

Guess what? It skipped. So I attempted one other rear derailleur:

That skipped too. So did this one:

May or not it’s the freewheel? I dug out one other one, a Shimano. It skipped. I shortened the chain, figuring possibly I wasn’t getting sufficient pressure out of the derailleur. I performed with restrict screws and the “B” screw on the Ultegra. In the end I acquired the very best outcomes with the Ultegra derailleur coupled with the chain lower as brief as I dared, and it labored completely on the large ring…however within the little ring it nonetheless skipped. Right here’s the way it seems in that place:

That looks as if it ought to work to me however maybe I’m lacking one thing apparent. No matter’s occurring it must be one thing I’m overlooking, or establishing unsuitable, or the derailleur’s bent or one thing, or one way or the other each my freewheels are worn (although they positive don’t look it), as a result of Rivendell have been driving them this manner for awhile now with no issues, as have loads of different folks:

*RIVENDELL* roaduno (54.5)

No, it’s undoubtedly me. I’m positive I’ll determine it out, however within the meantime be at liberty to inform me what I’m doing unsuitable.

RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Most Popular

Recent Comments